|
 |
HP60 PH3*380V 6＂(전화문의) |
 |
| Horsepower: |
60 |
| Voltage: |
380 |
| Frequency: |
60 |
| Phase: |
Three-Phase |
| RPM: |
3450 |
| Service Factor: |
1.15 |
| Subtrol Heat Sensor: |
YES |
| Rotation: |
|
| Packing: Pallet=P, Single=S |
|
| Poles: |
2 |
| Downward Thrust (lbs): |
|
| Max. Ambient Temp.: |
122°F / 50°C |
| Duty Rating: |
Continuous at 0.5 ft/sec flow past motor |
| Construction: |
Sand Fighter™ Water Well |
| Length (inches): |
61.3 |
| Shipping Weight (lbs / kg): |
330 / 150 |
| Carton Size: |
8.75 x 10.50 x 71.75 |
| Castings: |
|
| Stator Shell: |
Per Standard Water Well |
| Stator Ends: |
Per Standard Water Well |
| Shaft Extension: |
Per Standard Water Well |
| Fasteners: |
|
| Seal: |
|
| Seal Cover: |
|
| Slinger: |
Nitrile ( 5-40 Hp) Viton (50-60 Hp) |
| Thrust Bearings: |
|
| Lead in Motor: |
|
| Leads: |
3 |
| Lead Wire (or Cable): |
XLPE |
| Wire Size: |
#8 w/GND |
| Lead Potting: |
Epoxy |
| Lead Sleeve: |
|
| Lead Jam Nut: |
Brass |
| Diaphragm: |
Nitrile ( 5-40 Hp) Viton (50-60 Hp) |
| Diaphragm Cover: |
300 SS Series |
| Diaphragm Cup: |
|
| Diaphragm Spring: |
300 SS Series |
| Filter: |
|
| Insulation: |
Class F |
|
